Velcro Cable Tie Mount with Vice Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of IonNight's great model modified to accommodate a velcro cable tie.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This model allows you to mount a velcro tie to a table without needing glue/tape/screws. This came in handy as I wanted to manage cables behind a desk that had cheap veneer on the edges. Adhesive was peeling the veneer off and I didn't want to drill a hole in it.
I had to scale the bolt from the original model to 97% in order to make it work nicely. The uploaded step and STL files are at 100% scale. This version is designed to accommodate a 30mm desk. You can modify the STEP file easily to work with thicker desks if needed. For a thinner desk, you can modify the STEP file or use the longer bolt from the original model.