CORE One+ Printhead Cover Right Lever (Automatic Vent Opener, Modified)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slight modification to the original model that adds an additional tab which pushes the vent further when opening.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I recently upgraded my original CORE One to a CORE One+, mainly for the automatic vent opening/closing feature. In my experience, the vent would properly close but it would not open entirely, leaving about 1.5mm of possible travel remaining. This bothered me just enough that I made this simple tweak to the original model, which has fixed the issue for me. The vent now reliably opens and closes automatically. I printed it in Prusament PCCF per the original but it would probably be just fine in PETG (since it's not a 'critical' component) or even better ASA/ABS.
This part is intended for use with an otherwise all original CORE One+ (or one that has been upgraded from a CORE One as mine was). Please be aware that installing this part alongside other related modifications, such as those which allow the top cover to be removed, may cause issues. Also, it goes without saying but if your automatic vent opening already works reliably, you needn't bother with this part. I wanted to share it just in case anybody else was experiencing the same problem as me.