Splatoon 3 Tri-stringer Cosplay Prop Attachment for 66" Galaxy Aspire Recurve Bow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the Tri-stringer from Splatoon 3 as a cosplay prop to attach to a 66" Galaxy Aspire recurve bow.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is a full size model! The files and model were created to fit together nicely at full size, so if you scale it up or down the parts will not have a nice press fit. Additionally, the handle is able to be pulled back partially for posing for photos. Also, please only use this prop on a unstrung bow for your own safety, the safety of those around you, the bow, and the prop.
The parts are large, but are shelled out on the inside so the weight is not too heavy. Because the parts are large though, they will need to be cut into parts to be printed. When I printed mine, I used the slice tool in PrusaSlicer to create dovetail joints, which worked very nicely. With this, the brace is able to fit on a Prusa Core One L, and all other parts are able to fit on a Prusa Core One (in multiple print jobs). Finally, make sure to print 2 small canisters, one for the top and one for the bottom.