Minions maintenance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
**Note:** Test print with a **0.4 mm nozzle** resulted in **low quality**. Fine details were lost. A **0.2 mm nozzle** or **SLA printing** is strictly recommended.
Printing Recommendations
This model features extreme detail (fine wires, inscriptions, small tools) and serves as a true torture test for any 3D printer.
1. Priority: SLA (Resin Printing)
Why: This is the only way to ensure the clarity of small parts without the risk of breaking them during support removal.
Settings: Layer height 0.03–0.05 mm; tilt the model 30–45° to keep supports off the minions' faces.
2. For Modern FDM Printers (Bambu Lab, Voron, Prusa)
Nozzle: 0.2 mm is highly recommended (a 0.4 mm nozzle will fail to render the inscriptions).
Layer Height: 0.08 mm (ensure it matches your Z-axis "magic numbers").
Supports: Organic/Tree supports only. Use "touching buildplate only" settings.
3. For DIY and Budget FDM (Ender 3, RAMPS-based)
Speed: Keep it very low (20–35 mm/s) for outer perimeters.
Acceleration: Limit to 500–800 mm/s² to prevent vibrations on thin parts.
Layer Height: 0.12 mm (optimized for M5/T8 lead screw pitches).
Cooling: 100% Fan Speed throughout the entire print.
Pro Tip: If printing on FDM and results are unclear, scale the model to 150-200%. This significantly improves the printability of the finest elements.