Super SPAMF Compatible Geometry Priming Slide V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse-designed Super SPAMF compatible priming slide
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Open Community License v1
I reverse designed a priming slide for the Super SPAMF based on the geometry of the priming bars and the SPAMF breech.
With this piece and a few others you can find floating around the Internet, you will be able to build a Super SPAMF without needing the original files. Here they are:
https://www.thingiverse.com/thing:5399643
https://www.thingiverse.com/thing:5441919 (Specifically the priming guide)
You will need to trim a little material (about 1 mm) from the original SPAMF breech because I made the slide is slightly thicker around the hole for the breech nub for extra strength. I did this with a dremel but a hand file should work.
Settings:
5 walls, 25% gyroid infill (optimize for strength)
IMPORTANT: Print VERTICALLY and increase bottom shell layers to at least 7. The front is where the most amount of force is applied so it needs to be strong.