Ultra-Clean Wall & Desk Mount for Ugreen Nexode 200W Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom-designed, functional, and sleek mount to secure your high-power Ugreen charger and reclaim valuable desk space.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 257
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
Reclaim your workspace and secure your powerful Ugreen Nexode 200W (4-Port) charger with this meticulously designed, low-profile bracket. Whether you want to mount it to a wall, under a desk, or to the side of a workbench, this bracket provides a robust and elegant solution. It is specifically tailored to fit the form factor of the Ugreen 200W charger.
How it Works
To install, simply use two wood screws appropriate for your mounting surface (e.g., M4x16mm for wood or under-desk, or dry-wall anchors for wall mounting). Ensure the bracket is level before tightening. The charger then slots securely into the four corner clips.
Features
Robust Corner Cradle: The four reinforced corner clips provide a secure and precise grip, holding the charger firmly in place without hindering accessibility to any of the ports. The front ports are clear, and the side profiles are open.
Optimal Passive Cooling: The central cross-frame structure features a large, open-air design. This ensures that the high-power charger has ample ventilation to prevent overheating during heavy use, critical for performance and longevity.
Integrated Dual Mounting Tabs: Features two sturdy, integrated mounting ears with screw holes (sized for standard M4 or #8 wood screws), allowing for easy and rock-solid installation on a variety of surfaces.
Branded Touch: The center cross-section features an embossed Ugreen logo, adding a professional finish that aligns with the product's identity.
Easy, One-Piece Print: This bracket is designed to print flat without supports, making the printing process incredibly simple and efficient.
Print Settings
Material: PLA or PETG is fine for general mounting.
Orientation: Print flat on the print bed.
Layer Height: 0.2 mm.
Infill: 15-20% Gyroid or Grid.
Walls/Perimeters: 3 wall loops for strength.
Supports: No supports required.
Don’t forget to post your Makes! I'd love to see how you are using this mount to tidy up your setups.