Wide Bridge / Recovery Layer Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bridge Test specifically designed to test number of recovery layers needed for stable bridges.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
The two large models are not (quick) calibration tests. They are intended to print a 'real' bridge set high above the bed and wide enough to look and functions as a proper bridge to mimic the setting on a real print. Provides info on how many recovery layers you actually need to make it stable and the distances you can get away with. Works great for educational purpose: set a pause just before the pillars are done, then watch plastic being printed in thin air whenever you are ready. Print along X and Y axis to see how bridge behavior changes. Use slicer to check and/or manipulate which part/layer gets printed how and why.
The small model included is a quick version I use for calibration with 1.5cm and 5.5cm spans.
Note: The large models have the bridge portion set above the pillars, they are intentionally modeled to lay on top to isolate the layers that make up the bridge. The small model has the bridge modeled to transition from pillar layer type into a bridge layer type. Both are designed for .2 line height and 5 top layers.