UHW50 (inbouwdoos) LID | DEKSEL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
What this is
Cover for the UWH50 box (hollewanddoos).
IMPORTANT: Use at our own risk! This is not an electrical qualified product or part.
Why I made it
UWH50 box doesn't come with a lid to cover it, which I needed during reconstruction of my second floor.
Compatibility / dimensions
Fits the UWH50 wall box using the two standard screws attached to the wallbox.
This cover is not designed nor qualified to secure electrical safety. Use at your own risk.
Print settings
Print settings + material: I used PLA+ (eSUN), as it only needed to cover for a certain period, and not for ever. In that case I would consider PETG/ASA/ABS.
Layer height: 0.2mm
Fill density: 25% (or what you think is needed. 25% works for me.
Fill pattern: Gyroid (my standard to go fill pattern)
Top/Bottom fill: Archimedian Chord (no specific reason)