JeNo 3" Ducts Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your JeNo 3 into a ducted drone with this carbon & TPU kit
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
JeNo 3" Ducts Kit
A little note first
Making this design takes time, all my designs are and will always be free. If you find my work useful and want to support it, you can do it through this link.
Thanks !
Technical specifications table
Details | |
|---|---|
Compatibility | JeNo 3" Frame |
Supported cameras | Any |
Parts list
Name | Quantity | Material | Note |
|---|---|---|---|
Reincorcement bar | 2 | Carbon | |
Bottom duct | 2 | Carbon | |
Top duct | 2 | Carbon | |
Top protection | 2 | Carbon | |
Duct support | 4 | Titanium/Nylon/Aluminium Standoff | |
Feet | 4 | TPU | |
Front TPU | 2 | TPU | Mirror it for the other side |
Back TPU | 2 | TPU | |
Middle duct support | 2 | TPU |
Frame detail
From top to bottom to top (carbon parts)
Reinforcement bar This is mostly what supports the whole duct assembly
Bottom duct Thats the bottom carbon duct, it holds the tpus/top duct/protection
Top duct Pretty self explanatory
Top protection This is optional but recommended if you want maximum rigidity and protection over the props
Important: The top and bottom ducts are not the same parts, the bottom one is made to hold pressnuts.
TPU parts
Duct support This holds the two ducts together
Feet This is just a small tpu to protect the frame from the ground
Front TPU This attaches to the camplate and holds the ducts
Back TPU This attaches to the back spacers of the frame
Middle duct support Holds the ducts with a screw in the middle
Extra hardware
You will need extra hardware in order to assemble the frame:
M3x6 screws (x14)
M3x6 Chamfered screws (x10)
M3 Pressnuts (x8)
Versions:
V1.1 - Added one file that i forgot.
V1 - Initial post.