1 / 2
Backpanel with SKR3EZ + LDO LCP300-24D5 integrated mountpoints for Rook MK2 — zdjęcie 1
1 / 2

Backpanel with SKR3EZ + LDO LCP300-24D5 integrated mountpoints for Rook MK2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Customized back panel to include mount points for BTT SKR3EZ + LDO LCP300-24D5.

Ocena
0 / 5
Polubienia
5
Pobrania
5
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Customized back panel to a a BTT SKR3EZ and  LDO LCP300-24D5 PSU on the back of Rolohaun's Rook MK2 DIY 3d printer.  The original panel is designed to have mounting brackets hot glued on but after making brackets for these devices I was having issues fitting them in the alignment I wanted.  Making the mount points integrated in the panel I was able to get a better placement and support than I was getting with my brackets.  99% of this is because I convinced myself I wanted everything in/on the printer and that I want to try RRF instead of klipper.

Heat sets are used on the PSU points because of the weight.

 Items needed:

4x m3x5x4 heatset inserts

8x m3x6 screws

LDP LCP300-24D5 PSU (Rolohaun Aff link to KB-3d)

BTT SKR3EZ Control board

Rook MK2 - 

Kanrog's Mount collection - 

Tagi