Otto DIY Quadruped robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A great mix of 2 great opensource robots Otto and Kame, giving the ability to move around in a more dynamic way.
- Ocena
- 0 / 5
- Polubienia
- 215
- Pobrania
- 4610
- Wydruki
- 1
- Wyświetlenia
- 15 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Quad was inspired was inspired by #OttoDIY hat we all know ;) and MiniKame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery.
Features
- 👩💻 Simple Programming with Otto Blockly or Arduino
- 📃 Instruction manual included
- 👣 Walks & dances
- 🔊 Makes emotional sounds and melodies
Print instructions
Recommended to use a FDM 3D printer with PLA material.
No need supports or rafts.
Resolution: 0.3mm or 0.2mm for better resolution
Fill density: 15%
List of Parts
- 🖥 Otto Nano Microcontroller + I/O board
- 🔌 Micro USB cable
- 🔋 Rechargeable battery
- ⚙ 8 x micro servo motors with set of screws.
- 🔊 Buzzer
- 🌈 16 x DuPont cables
- Phillips screwdriver
- 3D Printed head (select from ultrasound or led matrix)
- 3D Printed body
- 3D Printed legs
- 3D Printed feet
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers. Join today our Otto Builder community