Ugreen CM624 HDMI switch wall/HSW mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach it to a wall or a HSW (Honeycomb Storage Wall) lattice using M4 countersunk screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
how to print
3 models provided. The screw gaps have been calculated to match HSW's lattice.
• vertical: device inserted from the top (recommended for a vertical wall mount)
• horizontal: device inserted from a side
• both/universal: holes for both options are included, so you can choose after printing
Print with the bottom on the build plate, as provided. No supports required.
Electronic devices can get quite warm. Do not print in PLA. PETG is advised.
how to use
Countersunk screws, M4 (base < ⌀4, top < ⌀8).
Attach it to the wall/HSW folling below instructions.
Then simply push the device in (or its cable before if you want that orientation).
The device can be inserted from either end, and facing towards or away from the wall/HSW lattice.
wall mounting
Vertical mounting: use screw in the top hole. Screw in the bottom hole is optional.
Horizontal mounting: use screws in both holes.
HSW mounting
Follow instructions on the dedicated page.
links to components
(these are affiliate links, using them will cost you nothing, but will support my work)
(you can try and browse for other cheaper sellers, those are the ones i ordered from)
selftapping countersunk screws (M4 variants)
countersunk bolt screws (M4 variants)