Ferm Rotary tool tray (Gridfinity 2x5x6)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool tray for the Ferm Rotary Tool (Dremel like). With slots for 12 tools and charger.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tool tray for the Ferm Rotary Tool (Dremel like), with slots for 12 tools and charger. (Ferm CTM1018 Corless Li-ion combitool).
Big shout-out to XVIIarcano for the original concept. I added outer wall pieces and extra slots for tools.@XVIIarcano
Just for reference, I used the following printsettings, but by all means, use the ones you think will fit the best: Nozzle: 0.4 mm, layer: 0.2 mm, infill: 15%, 2 perimeters, with Prusa Orange PETG.
(Don't make the same mistake I did, my seam was set to 'random', because of the previous print, that had no corners. That is a very ugly result for a print, that has corners, with plenty options to hide it. The option 'nearest' wil give a much nicer result for this print).