The "No-Tip" Pet Guard for Ikea FNISS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop pets from tipping the trash! A sleek, wall-mounted anchor designed for the Ikea FNISS bin and similar trash cans.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Is your small dog treating the bathroom trash like a self-serve buffet? If you or your spouse prefer open-top bins but hate the mess caused by curious pets, this is the solution you need.
I designed this Anti-Tip Wall Anchor specifically for the Ikea FNISS trash bin after our new chihuahua decided the washroom garbage was his favourite toy. While lids can be a hassle, this anchor keeps the bin upright and secure against the wall without changing how you use the bin.
Features:
Pet-Proof: Prevents small dogs and cats from tipping the bin over.
Quick Print: Only 55 minutes total for both parts.
Lightweight: Uses less than 14g of filament (including supports).
Low Profile: Blends into the wall and the bin rim.
Universal Use: While designed for the FNISS, it should work for most bins with a similar rim/lip.
Print Settings:
Supports: Minimal supports required for the sliding latch mechanism.
Material: PLA, PETG, or ABS (PLA works perfectly for this light-duty application).
Installation & Use
Setting up your "No-Tip" zone is quick and easy:
Mount the Base: Screw the wall-mount plate into your wall or baseboard at the height of the bin's rim.
Slide the Latch: Slide the locking arm into the wall-mount plate.
Secure the Bin: Simply tilt the bin slightly to hook the rim under the latch, then let it sit flush against the wall.
Emptying: When it’s time to take out the trash, just tilt the bin outward to release it from the latch. No unscrewing required!