1 / 2
Lowe HF150 LCD Backlight Diffuser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Open Community License v1
Lowe HF150 LCD Backlight Diffuser
This is a diffuser for illuminating the LCD on a Lowe HF-150 receiver.
There is space for 2x3mm LEDs, one each end. I used two green LEDs in series with a dropper resistor powered the VBAT line.
I printed it in clear PETG at 100% infil. I stuck a white label to the back of the printed part. I did experiment with putting down a few layers of white PETG instead, this wasn't as good. I also tried a lower infill but it seemed worse. The illumination isn't as even as the photos might suggest!
I used a new transreflective display from RS Components part number 185-0193.