LayersFactory
Zgłoś model
1 / 1
Gen 2 Chevy Colorado Ditch Light Mounts — zdjęcie 1

Gen 2 Chevy Colorado Ditch Light Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gabriel Grenier

Gabriel Grenier

@GabrielGreni_3739290

Ditch light mount for hood of Chevy Colorado

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

2015–2022 Chevy Colorado / GMC Canyon Ditch Light Mounts — Hood Hinge Bolt-On — Pair

Custom-designed ditch light mounts made specifically for 2nd Generation Chevy Colorado and GMC Canyon trucks. These mounts install using the existing hood hinge bolts, so no drilling or permanent modification is required.

Designed and tested on a 2017 Chevy Colorado, these mounts should fit all Gen 2 Colorado and Canyon models (2015–2022) that share the same hood hinge configuration.

Perfect for mounting auxiliary lighting such as ditch lights, cube lights, or small light pods for improved trail and roadside visibility.

Features

  • Bolt-on installation using factory hood hinge bolts

  • No drilling required

  • Designed for standard aftermarket cube/ditch lights

  • Clean OEM-style mounting location

  • Low-profile design minimizes hood interference

  • Strong and durable design suitable for off-road use

Fitment

Tested On:

  • 2017 Chevy Colorado

Expected to Fit:

  • 2015–2022 Chevy Colorado (Gen 2)

  • 2015–2022 GMC Canyon (Gen 2)

⚠ Fitment Note:
These mounts were physically tested on a 2017 Chevy Colorado. While hood hinge geometry is shared across Gen 2 trucks, confirm compatibility before installation.

Installation

  1. Open hood.

  2. Remove factory hood hinge bolt.

  3. Position mount over hinge.

  4. Reinstall factory bolt through mount.

  5. Attach ditch light to mount.

  6. Adjust light angle and tighten hardware.

Typical install time: 5–10 minutes per side

No cutting or drilling required.

3D Printing Recommendations

These mounts are designed to be strong structural parts, so material choice and print orientation matter.

Recommended Materials

Best Options:

  • PETG

  • ASA

  • ABS

  • Nylon

Recommended Print Settings

Layer Height:
0.2 mm

Wall Count:
4–6 walls

Top/Bottom Layers:
5–7 layers

Infill:
40–60%

Recommended infill types:

  • Gyroid

  • Cubic

  • Honeycomb

Print Orientation:
Mount flat with the base contacting the build plate.


Supports: Yes

  • Support Type: Tree Supports (Slim)

  • Top/Bottom Support Z Distance: 0.28 mm

  • Support Interface Layers: 4 top interface layer

Tagi

mountlightmountmountingbracket