USB & SD Card Holder for pegboard, Omniwall & Wall Control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use 3 of these to hold my various thumb drives and SD cards. There are spaces for 10mm magnets or you can use pins.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use 3 of these to hold my various thumb drives and SD cards. There are spaces for 10mm magnets or you can use pins.
I only use 2 or 3 magnets even though there is space for 5.
You can definitely print the one without tabs with the USB slots face down without supports. I think the one with tabs can go with the tab side down but I'm not positive. I haven't printed it in a while.
I like to use the pins (automotive body clips) for my pegboard. They are cheap and really sturdy. You can find them on Amazon. 1/4" or 6.3mm pins work well. I am actually using the 7mm pins. https://www.amazon.com/MANSHU-Fastener-Retainer-Automotive-Retainers/dp/B0784S6LWZ