Furniture Leg Spacer (Paremetric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print that saves your walls from being scratched by furniture.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Leg Spacer
The Offset dimension is the distance from the wall to the center of the hole. The Hole dimension is the diameter of the hole.
Printing
No supports needed.
Print with 15% or more infill
Sizes
Here is a link to Onshape where you can modify the parameters. https://cad.onshape.com/documents/f1d90293942c05e216dffb0d/w/70a63ddcd2b1a1e035f438e1/e/2a02fd4117cf50464cd72260?renderMode=0&uiState=69d65dfd0df0076e751c4838
To Modify the parameters you may need to make an account.
After making an account you can make a copy of the document.
Then you can change the parameters to your needs.
Finally you can export your file.
There are many good onshape tutorials on YouTube.