WallBelt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to hang things that are designed to go on your belt on your wall instead. Or some other vertical surface.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Allows you to hang things that are designed to go on your belt on your wall instead. Or some other vertical surface.
Print Settings
Rafts:
No
Resolution:
<= 0.3mm
Infill:
Doesn't matter. Part will print as almost solid.
Notes:
Recommend no courser than 0.3mm layers as the slope on the top needs to be fairly smooth.
The "shrug" -__/- shape seemed pretty obvious, but dimensions are key to making this work well.
Measured the belt clip on my handheld transceiver using the depth end of my calipers and used that plus ~50% as the distance to be from the wall that the part is to be mounted to.
Category: Organization