1 / 5
SKADIS tape holder (16mm tube needed) — zdjęcie 1
1 / 5

SKADIS tape holder (16mm tube needed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tape holder for a IKEA SKADIS board. Uses 16mm tubes as the horizontal support.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I saw @Manicken's adjustable tape holder and looked like a great idea. I saw that there was a step file on the model, and given that I had some 16mm plastic tube I used the step file to remake the model to fit those tubes.

The tubes provide a sturdy support and, the main reason, I already had them laying around. The 3D-printed part doesn't move at all and the plastic tubes remain on their place without additional support.

The biggest tape I've placed is a bit over 12cm and remains in its place.

Tagi