HSW asymmetric insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Asymmetric insert for Honeycomb storage wall. Holding heavy things on HSW.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Asymmetric insert for HSW. Designed for hanging heavy objects on HSW. Thanks to its asymmetry, the insert can withstand very high loads and will not pop out of the HSW.
This insert must be inserted from top to bottom. First, insert the upper part (where there is no latch), then rotate and lower the lower part until it snaps into place.
Due to the asymmetry, there are several limitations:
1. The insert can only be placed in a single horizontal line on your model.
2. The insert must be positioned near the top edge of your model.
The insert was developed in OpenSCAD. To edit the model, you need to download the hsw-asymmetric-insert.zip archive, extract it, and open hsw-asymmetric-insert.scad.