Part383273
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Singer 518 feed dog gear 383273
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a custom 3D model of part 383273, designed as a replacement gear for repair or DIY projects. The model was created from measurements and references to closely match the original part’s dimensions and functionality.
It is suitable for users who need a replacement component when the original is worn out, broken, or unavailable. The gear is optimized for 3D printing and should work well on most standard FDM printers.
Details:
Designed based on measured dimensions
24 teeth (adjust if needed based on your version)
Outer diameter approximated to match common listings (~23–25 mm)
Printable without supports (depending on orientation)
Recommended material: PLA for testing, PETG/ABS for durability
Notes:
Please verify dimensions with your specific part before printing, as slight variations may exist between versions.
You may need to fine-tune scaling depending on your printer accuracy.
Designed for personal use, repairs, and prototyping.
Print Settings (suggested):
Layer height: 0.12–0.2 mm
Infill: 40–100% (higher for strength)
Walls: 3–4 perimeters
Slow print speed for better tooth accuracy
Disclaimer:
This is a reverse-engineered model and is not an official part