Losi LMT 2.0 Digger Rod Ends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upper and lower rod ends for the Losi LMT 2.0 Diggers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I broke a rod end, and since literally no one has them in stock for months I was forced to roll my own. These thread on very snug and have survived several runs with lots of high jumps, virtually zero issues.
I have printed these in Overture High Speed TPU as well as regular softer Overture TPU. Regular TPU has more flex than the stock rod ends, but the high speed is close enough. I don't find it affects the control of the car much, but I am only running 2 at the moment, of the softer material. The only real risk is the threads tearing out, although there is not a whole lot of force in that direction so I don't see this being an issue.
I made the 4mm thread hole 3mm wide, so the fit is extremely tight, which is ideal for this application.
Print them on their side with automatic support on the build plate only. I've included a 3mf of 4x rod ends laid out to make things easier. 100% infill, 4 walls.