1 / 2
Toyota Door Lock Rod Clip AW11 MR2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Push clip for the door lock rod on an AW11 MR2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
You may want to scale this to around 103% or so depending on settings etc, mess around with it.
Also note that the clips on the back are not perfect, this part is usually pushed in and then affixed with some epoxy or glue on the car from the factory. I just used epoxy after pushing it in. Works fine for me.
Share what you make. :)