PETG Hydro-Resistant Structural Leveling Interface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
This is an engineered structural intervention designed to restore planar alignment and structural integrity to load-bearing bathroom furniture. When OEM (Original Equipment Manufacturer) plastic supports degrade due to material fatigue or environmental stress, this solid-state interface effectively bridges the gap, ensuring a perfectly flat surface for sensitive top-loads like ceramic bathroom sinks.
Engineering Highlights
Optimized Surface Area: The 50mm diameter provides a wide footprint, drastically reducing point-load stress on the underlying bathroom floor while stabilizing the vanity above.
Environmental Resistance: Manufactured using PETG, this component is highly resistant to the moisture, humidity, and temperature fluctuations typical of bathroom environments, preventing the degradation seen in traditional wood or metal shims.
Static Load Transfer: The 10mm Z-height acts as a precise, solid compressive member, transferring the weight of the furniture and sink directly to the floor without lateral deflection.
Technical Specifications
Geometry: Cylindrical (50mm Diameter, 10mm Z-Height).
Material: PETG (Polyethylene Terephthalate Glycol) – selected for its superior impact resistance, sustained compressive strength, and high moisture tolerance.
Application: Furniture leveling, structural load distribution, OEM leg replacement.
Recommended Print Settings:
Infill: High density (50% - 100%) for maximum compressive strength.
Perimeters: Minimum of 4-6 walls to resist lateral compression forces.