Asrock 4U12G 140mm fan mod (BC250 case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan-mod front plate for Asrock 4U12G to fit three 140mm fans
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to use more quiet fans for my Asrock 4U12G case where I have my 12 BC250 computers in.
To install this mod you'll first have to drill the 14 metal plugs holding the front panel to the case and remove it.
Easiest way to essamble the new panel is to mount the fans (and potential fan grills) first as the middle fan holds the two pieces together.
For fan grills I use this one:
To mount the power-switch and power-led, unplug the black and red led cables from the plug and push out the led holder and switch from the panel.
Push them into the printed panels and re-insert the led's cables.
Remember what cable goes where! In case you forget, this is how it looks like for me:

On the sides of my case there were 6 unused screws that I use to screw in the new panel to the case.
After that I also use 4 m3 short screws from the bottom to hold down the center of the panel to the case.
I'm also adding the Autodesk Fusion project file and .step file in case you want/need to modify the files.