Xiaomi Mi Box Stand / Riser - V1 (Standard 5cm Elevation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(Note: The original file names are in Turkish. "Mi box yükseltici" translates to "Mi Box Riser".)Elevate your Xiaomi…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
(Note: The original file names are in Turkish. "Mi box yükseltici" translates to "Mi Box Riser".)
Elevate your Xiaomi Mi Box with this sleek, minimalist 5cm riser! I designed this stand to provide better airflow for the device, prevent overheating, and create a cleaner look by allowing cable management underneath.
Looking for more stability? This is the V1 Standard version. If you want an anti-slip version with a designated area for felt pads to protect your furniture, check out the V2 (Anti-Slip Felt Base) version in my profile!
File Formats:
I have included STL, 3MF, and STEP files so you can print it immediately or easily remix and adjust the dimensions to fit your specific needs.
Files Included:
Mi box yükseltici v1.3mf
Mi box yükseltici v1.STEP
Mi box yükseltici v1.STL
Print & Test Details:
Test Print: Only 27 minutes. Use the included "Test" plate in the 3MF file to check the footprint before committing to the full print.
Full Print: Takes approximately 1 hour and 39 minutes.
Recommended Print Settings (Optimized):
Layer Height: 0.20 mm
Wall Loops: 3 (For extra perimeter strength)
Bottom Shell Layers: 5
Infill Density: 3% (Gyroid)
Supports: No
Material: PLA