Ubiquiti USW-Ultra 10-inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Ubiquiti USW-Ultra mount for a 10-in Server Rack.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 515
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mod10 Rack Mount for Ubiquiti USW-Ultra
A 10-inch rack mount for the Ubiquiti UniFi USW-Ultra, designed for use in the Mod10 mini server rack (or any standard 10-inch rack).
This is a remix of @Mauker's design with improved tolerances, support-free printability, and a slightly beefier overall construction.
Important Note on Tolerances:
This is a tight tolerance design. Your printer needs to be producing accurate extrusion widths and your material shrinkage needs to be dialed in. If your machine is over-extruding or your filament shrinks more than expected, the switch may not fit. Tune your printer first!
Printing & Installation:
Print the mount. No supports needed.
Slide the USW-Ultra into the mount. It should be a snug fit.
Mount into your rack using standard cage nuts or M6 nuts (with Mod10 adapter inserts).
Hardware Required:
Ubiquiti USW-Ultra: https://bhpho.to/3Q6JIbf
10-inch Mini Server Rack: https://www.printables.com/model/1225275-modular-10-server-rack-mod10
PETG or ASA filament recommended: https://mrly.link/prusament
Files Included:
USW-Ultra Rack Mount STL
CAD (Fusion - F3D)
CAD (STEP)
Recommended Print Settings:
0.2 mm layer height
4 perimeters
30%+ infill
NO Supports Required
PETG or Higher-Temperature materials recommended
Support My Work:
If you find this useful, please consider supporting my work: http://www.MandicReally.com/links