1 / 10
Heltec v4 pocketable case - with 3700mAh Li-Po  AND variants — zdjęcie 1
1 / 10

Heltec v4 pocketable case - with 3700mAh Li-Po AND variants

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SLIM Heltec v4 case- with & without the battery window or battery switch, rope loops & screen, MAG-SAFE cover added.

Ocena
0 / 5
Polubienia
5
Pobrania
50
Wydruki
0
Wyświetlenia
842
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Heltec v4 case that fits in a shirt pocket - for use with 3700mAh Li-Po as a companion radio with Meshcore or Meshtastic

A version of my shirt pocket case but for the Heltec v4 radio board

I have several versions of the body, with and without the battery switch and with and without the battery "window".

You will need M2 bolts ( I didn't use brass treaded inserts to keep design thin as possible) and optionally you may want the toggle switch. - there is both versions of the body included.

I used this LiPo Battery: https://www.amazon.co.uk/dp/B08215B4KK but had to change the plug, easily done.

The switch i used is: https://www.amazon.co.uk/dp/B07J4KB38W

Mag-safe magnet is from https://www.aliexpress.com/item/1005007440762172.html

if you print the mag-safe cover, please use a strong filament ( i used nylon) as its 0.3mm thick at the point where magnet sits.. (i have also included a non-chamfered version which is easier to print)

Tagi