1 / 3
Minions (Despicable Me) by @erikaheidi - MMU3 Version — zdjęcie 1
1 / 3

Minions (Despicable Me) by @erikaheidi - MMU3 Version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the fabulous Minons from Despicable Me by Heidi Makes (@erikaheidi)

Ocena
5 / 5
Polubienia
95
Pobrania
531
Wydruki
1
Wyświetlenia
1580
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here are the fantastic Minions created by Heidi Makes (@erikaheidi) with coloring added using Prusaslicer. The 3MF is configured for four perimeters and 140% of the original size for added strengh in the arms and other thin parts. Paint-on supports are included in the 3MF. Purge calculations courtesy of the MMU Purge Calculator using a multiplier of 0.75x. 

Slice and print all at once, or delete the ones you don't want to print from the file and slice. I think there's less purge block waste if all are printed at the same time vs. one at a time. 

Changes V2: fixed small areas of painting on eyelids

Tagi