1 / 1
Holder for enduro of pixel9 phone — zdjęcie 1

Holder for enduro of pixel9 phone

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A handlebar mount designed for enduro riding. It secures a Pixel 9 using a flexible TPU bumper plate

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

## 📦 Model Summary — Enduro Phone Holder (Pixel 9)

Purpose

A rugged, vibration-tolerant handlebar mount designed for off-road (enduro) riding. It secures a Pixel 9 using a flexible TPU bumper plate and attaches to the handlebar via a compliant clamp system compatible with soft bar covers.

Installing directly on habdlebar will destroy camera.

---

## 🧩 Design Components

### 1. TPU Bumper Plate

* Function: Shock absorption + device retention

* Material: TPU (recommended Shore hardness: 90A–95A)

* Features:

* Tight-fit contour for Pixel 9 geometry

* Raised lip around edges to prevent slip-out

* Cutouts for buttons, and charging port

* Slight flex zones and hole for insertion/removal

* Design intent: Absorb high-frequency vibration and impact without transferring stress to the phone body

---

### 2. Handlebar Holder / Clamp

* Function: Mounts assembly to handlebar with soft cover compatibility

* Material: PETG or ABS (avoid PLA due to heat + fatigue)

* Features:

* Split clamp or wrap-around geometry

* Inner surface designed to compress over foam/soft bar covers

* Anti-slip texture or ribs inside clamp

* Bolt-through or snap-lock mechanism

* Design intent: Provide secure grip without damaging bar or compressing soft cover excessively

---

### 3. Interface Between Plate and Holder

* Type: Fixed or semi-flexible mount

* Options:

* Rigid bolt connection (more stable)

* TPU isolator layer (better vibration damping)

* Design intent: Balance rigidity (readability) vs damping (protection)

---

## ⚙ Print Recommendations

### TPU Bumper Plate

* Nozzle: 0.4 mm

* Layer height: 0.2 mm

* Walls: 3–4 perimeters

* Infill: 15–25% (gyroid or cubic)

* Print speed: 20–40 mm/s

* Retraction: minimal (avoid stringing)

---

### Clamp / Holder (PETG / ABS) + Nut Heads

* Layer height: 0.2 mm

* Walls: 4–5 perimeters (critical for strength)

* Infill: 40–60% (grid or cubic)

* Orientation:

* Clamp axis parallel to layer lines → improves tensile strength

* Supports: only if necessary for overhangs

---

## 🔧 Assembly

* Insert phone into TPU bumper plate

* Attach plate to clamp (4ps of M3 bolts )

* Mount onto handlebar (with or without bar pad). Install 8x M3 heat-set inserts into the clamp: distribute them between the base and the outer half-ring. Secure the mount plate to the handlebar using M3 bolts through the holes in the panel.

* Tighten evenly to avoid stress concentration by two M5x50 bolts and nut, use nut head

---

## ⚠ Design Considerations

* Vibration damping: TPU layer is essential for off-road use

* Thermal resistance: Avoid PLA (softens in sun exposure)

* Retention safety: Consider secondary retention (elastic band or tether)

* Tolerance: Allow ~0.5–1 mm clearance for TPU stretch and phone case fit

---

## ✅ Key Advantages

* Impact-resistant (TPU absorbs shocks)

* Compatible with soft handlebar padding

* Lightweight and field-repairable

* Custom-fit for Pixel 9 geometry

---

## 📁 Suggested File Structure

* pixel9_bumper_tpu.stl

* handlebar_clamp_petg.stl

* mount_interface.stl

* pixel6_nut_head_petg.stl

* assembly_notes.md

Tagi