Longer front nebula camera mount for Ender 3 v3 KE / SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed @DoodZero model to: (1) Make it a little longer (2) Make the camera a little farther from nebula pad.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I printed @DoodZero model since I wanted my camera to take pictures from the front of the printer, and did not want to disassemble anything to attach it. That model looked nice to me but I found two problems:
It crashed against my nebula pad (which is modded to be landscape and that could be the issue) - Comparison of both models:
Despite roughly cutting it with pliers to avoid the support crashing, the camera was still unattachable since its lower height would made the camera structure to crash into the pad.
Then I just modded it quickly in OrcaSlicer to make it longer and to lightly separate it from the pad.
Total height is ~97mm:
Now I have the camera next to the pad (less cables around), and I can have the low-front perspective that I wanted. So many thanks to the original author of the model!
Print instructions:
Elegoo PLA+ White.
EP ~80 for accuracy.
First layer 30.
Printed as oriented with no supports. First layer adherence is important.
Infill 15% crosshatch.
It took ~50min to be printed.
This is how it developed. I have to check my stringing issue, but bridges and overhangs are really good (despite they are not important as that part would face the bottom of the printer).
