1 / 5
Daily Wear Contact Lens Dispenser — zdjęcie 1
1 / 5

Daily Wear Contact Lens Dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is simple case designed to hold, display, and dispense a month's worth of daily wear contact lenses.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple print. No supports needed. The doors are friction fit tongue-in-groove sliders that are inserted at the top. I have my case mounted to the wall in my bathroom with command strips so I can easily mount and unmount it to refill it each month. Each door can sit open at any degree of openness to allow easy removal of each lens from its strip. Or it can be closed completely to keep the lenses safely contained. The windows in each lid allow you to see the contents, and adjust the lenses in the case without opening them as needed. There is a slight curve at the bottom to push the bottom of each stack forward.

 I made it large enough to accommodate most contact lenses that are sold in strips of 5 and stacks of 6 strips. The inner dimensions of each column are 50 x 36 x 156 mm.  Measure your lens strip stacks and if the dimensions are off, you can easily scale these items in your slicer to match your particular needs.   I printed mine in PETG but PLA and ABS should be fine as well.