Mario Kart Live: Home Circuit Printable Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your Mario Kart Live karts truly yours or replace broken pieces! Print your own!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Mario Kart Live: Home Circuit is an awesome toy, but they only released Mario and Luigi. What if they released more?
This is everything you need to theme a Mario Kart Live kart to whatever character you want! Print in PLA or PETG for most of the parts, but you will need a flexible TPU for the rear cowl if you want to print it.
This is a VERY COMPLEX BUILD that is quite fiddly! It's definitely doable, but you need to approach this with patience, a willingness to experiment, and being okay with trimming a lot of supports.
Almost every part (except the booster bodies) requires support. Orientation pictures are in the gallery; organic supports work best. Make sure your supports are working well before you attempt this -- many of these parts are a very close fit, so stray support material that is not properly trimmed will often make a piece not slot into place. Print with 0.1 layer heights -- this will increase print time, but will also render the details more thoroughly.
You are responsible for finding (or creating) the model of the character that you want to place. I recommend looking at [Spriter's Resource](https://models.spriters-resource.com/) for appropriate models, though they will likely need to be posed by yourself. The seat has a post in it specifically to aid in gluing. (See below for a video to assist on posing the model you find.)
When making your own character for the kart, they must be no taller than 48mm. Keep in mind that they also must be mostly out of the way of the camera; a little bit is okay, as the game puts an overlay over the bottom of the screen to hide the front of the kart, but there's not a lot of wiggle room there.
Use these videos as resources for taking apart the kart and reassembling it:
This is the bumper that you see on all of our karts -- I personally think it's indispensable.
If this is worth a few bucks to you, please consider covering the cost of a coffee as thanks: https://ko-fi.com/joekaufeld
Best of luck with the build!