Tiny S.E. Dual Color Salamander (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tiny salamander, the size of a coin, is easily printable in two colors, even without a multicolor system.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
A smaller variant of my previously made dual color salamander which I intent to use as geoswag (small objects for placing in geocaching caches) in the future.
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.
Printing information:
Scaling up/down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first, then to scale it as you wish.
Split the model to its parts before printing them both separately, when done, they should simply slide into each other
Due to its smallness use a 0.2mm nozzle
No supports are needed
A brim is recommended for both parts as it will help with bed adhesion.