1 / 6
Mammotion Luba 2 reinforced side protection v2 — zdjęcie 1
1 / 6

Mammotion Luba 2 reinforced side protection v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mammotion Luba side skirts with front wheel protection - reinforced remix Not for the high Lubas (1000H, 2000H...)

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
447
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

https://www.ebay.de/itm/135736243200

UPDATE 2024_07_27: changed the screw position, enforced the front bracket

UPDATE 2024_05_20: I have changed the model to a screw connection so that the wheel guard is not pushed out upwards on contact with obstacles.

UPDATE 2024_05_15: The frontwheel guard is still falling off. The mounting and attachment must be reconsidered. I think a screw connection will make sense. So still work in progress...

Mammotion Luba side skirts with front wheel protection - reinforced remix
I reinforced the side skirts and thickend the wheel protector because the original variant is destroyed in no time at all. 

My Luba 2 is running with the reinforced side skirts and they are still intact. I tested Prusament PC Blend as well as PLA+. Right now im running with PLA+ and its just fine.

This Model is not working with Luba 1, the high Lubas (1000H, 2000H and so on) and Models younger than 2025

Print Settings:

0.2mm Layer Height
>3 Perimeters
Infill 40% Gyroid
With Supports

 

Tagi