1 / 2
fgc 9 mag pivot pin and mag catch (reinforced)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated the fgc9 mkI and mkII pivot pin. Reinforced with 3mm rod. Also made mag catch thicker and hollowed a spot for…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Updated the fgc9 mkI and mkII pivot pin. Reinforced with 3mm rod. Also made mag catch thicker and hollowed a spot for 3mm rod, this should keep tab from bending under spring load.
Edit: the pivot pin needs work.
Category: Other