Worm Gear Assembly - Ball Bearings & D-Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Worm gear assembly that drives a rear gear set via through shaft
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This model is intended to be used with generic ball bearings (uxcell 626ZZ Ball Bearing 6mm x 19mm x 6mm available on amazon) and steel d-rod with a ground flat (5pcs Stainless Steel D-Shaft 6mm Round Steel Rod Linear Rail Shaft Robot D-Shaft Industrial Robot Parts for/TETRIX available on amazon.)
You will need to press the bearings in by hand and cut the steel rod to length in order to get a fully working assembly. You can utilize collars (6mm Shaft Lock Collar available on amazon) to lock rods in place if desired.
Main gear is driven by the spool gear while the gears with tooth count numbers in file name are intended for the rear gear set on the assy. Everything should be able to slide together with solid engagement and be removable without tools even though the tolerance between D-Rod and gears is very tight.
PET-G recommended and (>= 5) layer wall count