1 / 3
Minimalist Wii / WiiU sensor bar mount for 5-10mm OLED TV's — zdjęcie 1
1 / 3

Minimalist Wii / WiiU sensor bar mount for 5-10mm OLED TV's

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim sensor bar holder - for 5-10mm thick TV - multiple stl

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial

This is a sleek Wii & WiiU sensor bar holder that is almost invisible. It blends the sensor bar with the TV. It uses the slot underneath the sensorbar and latches onto the tv. There are multiple versions fitting to 5-10mm thick screen panels. 

The sensor bars mounts I found mounted the sensor with a large gap on the tv, and made the sensor bar obviously visible. That is why I made this version that makes the bar blend in with the TV. Measure up your tv to see which size you need.

Printing tips:

  • PLA / PETG

  • Possible to print without support / or with minimal support

  • ~5 gram for a set

  • Print as orientated in STL

  • 5mm, 6mm, 7mm, 8mm, 9mm & 10mm versions available for download.

Tagi