Campervan - Magnetic Fusebox Cover / Access panel

I made this magnetic fusebox cover during the conversion of my VW Crafter Van. It's a simple design made up of 3 parts,  Fusebox Bezel, Fuse Box Bezel Lock Plate, Fusebox Cover.  It's made to suit 15mm furniture board, the furniture board is sandwiched between the Fusebox Bezel and Fusebox Bezel Lock Plate and screwed together using M3 Screws.  The Fusebox cover and Fuse Box Bezel Lock Plate components have 5mm pockets in them to suit 5mm x 5mm x 5mm cube magnets that are available from ebay, Amazon etc....  The magnets must be inserted into the pockets in the correct orientation so they attaract each other rather than repel each other.  I printed these with default settings (2 walls, no support etc.... PLA+) on a Creality CR10SE.  Works really well as a cover for my 12v fusebox in my camper, but can be used as an access panel for any purpose that suits this size of opening. It has a nice magnetic click action when inserting the cover. Opening is 94mm x 139mm.