Kbdcraft israfel travel case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple travel case for kbdcraft israfel keyboard, held with magnets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Kbdcraft israfel travel case to make transporting the keyboard as easy as possible. You will need to replace the split angle pieces to use this case. This is to make the case as compact as possible and also because i never used them. Currently the case doesn't allow to use the keyboard while it's in the case. I might someday make a better version but currently i don't feel the need.
Requirements:
- large format printer
- 8x round magnets 3x2mm
- 14x square magnets 10x5x2mm
- superglue to attach the magnets
But i honestly recommend using less magnets, because the case can be hard to open with all magnets inserted. Also the magnets might require some force to get them in the holes. I've adjusted the model slightly to help with that but i haven't tested if that helped. Just use something flat to put them into place.
I also leave the step files if anyone wants to redesign the case for a smaller printer or to use different magnets.
Printed on a RatRig Vcore 4 using ABS.