Airplane Seatback Device Holder - Adjustable Magnet Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another remix of a device holder for commercial aircraft
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated V2 with 2 Magnets
V2 files have 2 magnets per device holder and all magnet dimensions are customizable parameters. I included these because the cheap 6x2mm magnets I had on hand were far too weak to hold the parts together.
The included 3mf has altered magnet sizes suitable for 6x2mm magnets. I also included step and fusion files with customizable parameters if you have different magnet sizes. Simply change the diameter and height values to match your magnets and adjust the diameter and height tolerance parameters to your specific printer's accuracy. Also included are parameters for a small gap under the magnet so that there is less adhesive spill over.