Meanwell 600W PS Mounting Bracket for Qidi Q2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meanwell 600W PS Mounting Bracket for Qidi Q2
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 571
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
The stock power supply for Qidi Q2 is 350W which barely powers the system. I personally replaced it with a 600W PS from MeanWell, Model No. LRS-600-24 . It's not mandatory, but a plus for better system operation.
This model set uses Q2's original PS mounting ears to mount the MW 600W PS without changing its structure.
Tips
IMPORTANT, you do need to raise the bottom of the machine for at least 30mm higher than original hight in order to use this model set (I have replaced my Q2's feet with 40mm hight rubber feet personally, see my another feet reinforcing model for details).
The original mounting screws, M4x8mm (4pcs), can be used to mount the 600w PS on the brackets. You could add 4 more since the MW 600W PS has 8 mounting screw holes.
4 sets of M4x12mm or longer screws (with washers and nuts) are needed to mount the brackets onto the machine bottom.
FYI, the yellow grounding wire do need to extend accordingly. Thanks to @AlexandruMar_5054775 who have mentioned it. :)
Diagrams
MeanWell Power Supply , Model No. LRS-600-24
Mounting illustration
Bottom overview
Safety Cover installed