Vacuum form setting for Cura
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the print settings I used for vacuum forming. These settings were recommended by a YouTube channel on how to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is the print settings I used for vacuum forming. These settings were recommended by a YouTube channel on how to vacuum form 3D printed objects. Vacuum forming a new windshield for the batmobile https://youtu.be/guDNpacVAtU I would like it but I can't find the one I watched because it was so long ago. I had to post it with a STL but you don't need to use it because the thing I'm uploading is just print settings. I made an edit to this profile it worked great if you were molding object at time so I increase the wall count and infill to make it stronger. I went to mold something I decided to do two in a row and it deformed. it extenuated the infill pattern. I haven't use the new profile yet but going to try it today. The other one is still good but for repeated use between forming it didn't hold up.
Category: Other