Puch hood emblem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It a replacement hood emblem for a Puch g wagon/army truck.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
It a replacement hood emblem for a Puch g wagon/army truck.
Print Settings
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
2mm
Infill:
100
Filament:
MatterHacker PLA
green but spray painted black
Notes:
I used the print settings that Devin Montes from make anything used to make a hood emblem for his BMW.
Print at 100% scale.
Post-Printing
Step one - I found the center of the piece then marked it.
Step two - Then took a 10/32 screw cut it down to a smaller length.
Step three - I drilled a hole slightly smaller then the screw and then very carefully took pliers and a really strong lighter or a torch then screwed it into the hole of the emblem. This helps the screw stay into the emblem and be stronger.
Step four - I spray painted it black
How I Designed This
I designed this by drawing it first making each part a different color thats going to be at different layer. Like my image. I then uploaded to http://3dp.rocks/lithophane/ and selected domed top shape then under setting made sure that it was on negative and left everything else the same then downloaded it and when in cura I scaled it to 2 inches in diameter and sailed it to 36% from Z axis. Theres probably a better way to do this but I don't know how. But I fixed it so it can be printed at 100% scale.
Category: Replacement Parts