AGV AX9 helmet gopro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this mount based on the original dust vent to hold a gopro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I highly recommend printing in PETG or relative strength material and to orientate the model 90deg sideways to best use advantage of the layer line strength for the clips. I made the model fit quite snugly to keep good hold of the helmet preventing the camera from falling. an M5 nut is use to be pressed in to the bracket for the camera mount.
Not much testing has been done with this mount so be weary of possible breakages. I uploaded the solidworks2024 file so that anyone can edit and modify this bracket to either fit their camera or make other improvements to the bracket, I would ask that any remixes to be uploaded under the remix section.