Core One Nozzle Wiper (slim design) + Purge Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the nozzle wiper + purge bin combo for Core One Plus. Remixed/Modified from AmethystZhou and 6d6178.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 2
- Wyświetlenia
- 259
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General
This design is a combination of a nozzle wiper and a purge bin. The nozzle wiper is a remix of the design by AmethystZhou, which I have not modified by much. I replaced some chamfers with fillets, as I prefer the look of those (and the smoother printing of XY axis fillets), and added some additional material to make it a tad more sturdy.
It kept their design of mounting to the arm on the right side from below - this way there is unobstructed access to the bed and the metal sheet detection is not interfered with (as it uses the front right corner of the bed). I prefer the wiper to be on the right side, as it is as close to the extruder parking position as possible in this location.
I also designed a purge bin inspired by the design of 6d6178 (who made the original design that AmethystZhou remixed their design from).
Gcode
For an in-depth explanation of how to generate the wiping gcode as well as an amazing website-based gcode generator check out the the design of 6d6178 - it is described in a lot of detail and works perfectly.
Necessary hardware
Nozzle Wiper
1x M3x10 (leftovers from Core One spare parts)
1x M3nS (leftovers from Core One spare parts)
Bambu A1 silicone nozzle brush (I used these from amazon.it, check the designs of 6d6178 and AmethystZhou for other options and links in different countries)
Purge Bin
2x M3x6 (leftovers from Core One spare parts)
2-4x 20x5x2 mm magnets