1 / 3
PHM Rocky Statue & Articulating Figurine (Grace included) — zdjęcie 1
1 / 3

PHM Rocky Statue & Articulating Figurine (Grace included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The files from the www.projecthailmary.com website so more people can print Rocky! I did not make these files.

Ocena
0 / 5
Polubienia
8
Pobrania
107
Wydruki
0
Wyświetlenia
315
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This includes the files on projecthailmary.com, so more people can print Rocky! 

Grace keychain is included as well.

Q: How print figurines on FDM, question?

A: 0.1-0.2 layer height, 15° overhang threshold, don't support bridges, organic supports on build plate only

The Grace keychains use very similar settings. Only difference is decreased branch density to 10-15% and a 3-layer raft, if you please. For supports on the inside, use support blockers or critical supports only to stop them... they are very difficult to remove. If you wish to attempt leaving them inside, turn the top contact Z distance to .2.

I also suggest scaling up to 150-175% for a larger figurine