1 / 5
TAXI - BRAKES Toy Cars Series (wheels separately) — zdjęcie 1
1 / 5

TAXI - BRAKES Toy Cars Series (wheels separately)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TAXI is the first car from “BRAKES Toy Cars Series" - a collection from my “BRAKES? No, thanks!” voxel arcade game!

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
1
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

TAXI is the first car from “BRAKES Toy Cars Series" - a collection of cars from my “BRAKES? No, thanks!” voxel arcade game - wishlist on Steam!

BRAKES toy cars need Universal BRAKES wheels (downloaded separately).

Wheels mount instruction

  1. Fit: Test-fit the 3D-printed wheels onto the car body.

  2. Cut: Cut a piece of filament to match the axle width, leaving a tiny bit of extra length on both sides.

  3. Heat & Shape: Carefully melt the ends of the filament (e.g., by bringing a soldering iron close to the tip) to create a "head". Ensure the molten plastic does not fuse with the wheels, allowing them to spin freely.


2-material supported print recommended:

  • PLA for the model and supports,

  • PETG for support interface (easy removal, smooth bottom surfaces)

  • NO support-model Z gap

Walls x3

Tagi