1 / 5
Prusa i3 (rework) X Carriage Adapter for Bulldog Extruder — zdjęcie 1
1 / 5

Prusa i3 (rework) X Carriage Adapter for Bulldog Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on the carriage adapter designed by Cyrrus. This version fits the Prusa i3 rework x carriage. Configurable…

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
311
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Based on the carriage adapter designed by Cyrrus.

This version fits the Prusa i3 rework x carriage.

Configurable OpenSCAD file included.

Instructions

Print thefinal-mount.stl file or customize theadapter.scad file to create a custom version (for different screw lengths or distance between screws).

Can be printed without supports. I used 30% infill and 5 perimeters to give it strength.

You'll need to fit 4 M3 nuts (nyloc preferably) at the top of the screw holes. I got them in by first placing longs screws through the holes, screwing the nuts a little and then pulling the screws by the head from the back.

Optional fan mount and bed probing servo can be found in the original design by Cyrrus.

Category: 3D Printer Parts

Tagi